Emergency Service Provider & Meter Installer ACS Gas Courses
Emergency Service Providers & Meter Installers Initial and Re-Assessment
|CESP1||Core emergency service provider gas safety assessment||All non-domestic and domestic natural gas fittings related to emergency service gas work|
|CoDNESP1||Changeover from domestic to
Emergency service provider and/or meter installer.
|All non-domestic and domestic natural gas fittings related to emergency service gas work|
|CMA1||Core gas meter installer gas safety assessment||All non-domestic and domestic natural gas fittings related to gas metering work|
|CMA2LS||Core gas meter installer gas safety assessment limited scope.||Primary domestic natural gas meters of capacity ≤ 6 m3/h (not connecting to an outlet supply). It does not include Work on altering position of meters, meter exchange, connection of outlet pipework or commissioning on appliances or internal installation pipework other than that required for the meter installation.|
|MET2||Domestic gas meters.||Install, commission, exchange and remove primary or secondary meters of capacity ≤ 6 m3/h.|
|MET3LS||Domestic natural gas meter installations limited scope.||Installation and commissioning of primary meters of badged capacity ≤ 6 m3/h not connected to an outlet supply.|
|MET4||Non-domestic diaphragm meters.||Primary diaphragm meters of badged capacity >6 m³/h ≤ 40 m³/h.
Pipework of diameter ≤ 2″ (50 mm) diameter. LP only.
|CMET1||Low pressure diaphragm and rotary displacement meter installations, natural gas||Primary meter installations incorporating diaphragm or rotary displacement meters without by-pass and of badged capacity > 6 m3/h ≤ 1076 m3/h and where the inlet pressure under normal gas supply conditions does not exceed 75 mbar and a meter regulator is to be installed.|
|CMET2||Diaphragm, RD and turbine meter installations, natural gas||Primary meter installations incorporating diaphragm, RD or turbine meters with and without by-pass at a pressure not exceeding 7 bar and not in the scope of IGEM/GM/6 Edition 2 (covered by CMET1).|
|REGT1||Testing/ commissioning domestic medium pressure regulators||All types of domestic MP meter regulator.|